Bridge, Hardware, Assembly instructions
Create a serene environment in your own backyard with the Whitehead Redwood Single Rail Bridge. Made from the finest California redwood, this bridge ranges in size from 4 feet to 14 feet. With its vast size selection, you can use these bridges to cover a small pond, or simply to make your yard aesthetically pleasing.The angled rails draw attention to the bridge's charming details and elegance. Shipped with a natural redwood finish that ages beautifully with time.
Dimensions:
4 ft. Bridge: 48L x 30W x 30H inches
5 ft. Bridge: 60L x 32W x 32H inches
6 ft. Bridge: 72L x 32W x 32H inches
8 ft. Bridge: 96L x 36W x 36H inches
10 ft. Bridge: 120L x 36W x 36H inches
12 ft. Bridge: 144L x 36W x 36H inches
14 ft. Bridge: 168L x 36W x 36H inches
Material
Redwood
Weight Capacity
750 lbs
Brand
Redwood
Arch
Standard
Rail Type
With Rails
Size: 4 feet, 5 feet, 6 feet, 8 feet, 10 feet, 12 feet, 14 feet
Start off with the 2 long beams (they are marked on the inside) and place them on the flat ground. Then get the planks (each one of them is numbered) and start from one end of the beams and match the number on the planks with the same number location that is on the beam, working your way to the other end. Look at the numbers and the lines that have been drawn to show you the correct location of all the parts. After you have all the planks screwed to the beams, start with the posts, which are numbered for correct locations. Also, bolt the posts on using a 9/16 wrench, looking at the trace lines for correct locations. Get the rails, looking at the correct numbers for correct locations. Screw the rails on the center post first -- you might need two people to do this, or better yet, a C clamp on one end, and then GENTLY pull down to where the trace lines are. Screw in place .
Q1: What is the weight capacity for EACH length bridge?
A: 750 lbs. for all bridges.
Q2: What is the height from the ground of the end planks?
A: The walking surface from the floor to the top of the arch is 9 inches and from the floor to where the arch starts is 3 inches
Q3: What is the length from the bottom end of the bridge to where it starts to arch?
A: The bridge begins to arch at 1 foot, arches for 2 feet and then goes back down for a foot.
Don't see the answer you need? Ask a Product Expert! The answer will be emailed to you and then posted here.
